An AI dispatch agent that suggests the right tech for each job and flags conflicts.

Your dispatcher is on the phone, watching the board and reading a group chat, all at once. The first job of the morning was booked for an hour and a half and is still going at noon. The tech closest to the new call has never worked on that brand of boiler, and the one who has is across town. Most of these calls get made from memory, in a hurry.

We build an agent that reads the board in your field software all day. For each new job it suggests a tech based on skills, location and what is already on their day, and it says why. It flags jobs that are running long, double bookings and stops nobody has confirmed. It suggests and it flags. Your dispatcher decides and moves the pieces.

  • ServiceTitan
  • Jobber
  • Housecall Pro
  • FieldEdge
  • Service Fusion
  • Workiz
Dispatch AgentExample
  • 6:45 AM

    Morning board

    Today's 31 jobs checked. 2 conflicts and 3 unconfirmed stops sent to the dispatcher.

    Sent
  • 7:40 AM

    New job

    No-heat call on the north side. Suggests Dana: furnace certified, 12 minutes away, open until 10.

    Needs your OK
  • 9:15 AM

    Running long

    Luis is 50 minutes past the estimate on the Patel repipe. His 11:00 is at risk.

    Flagged
  • 9:16 AM

    Swap suggested

    Give the 11:00 drain call to Sam, who finishes two streets away at 10:30.

    Needs your OK
  • 1:05 PM

    Skill mismatch

    Panel upgrade is assigned to an apprentice with no lead electrician on the job.

    Flagged

Example activity. Your agent works from your own jobs, customers and records.

What is an AI dispatch agent?

An AI dispatch agent is software that watches your dispatch board all day and suggests which tech should take each job. It weighs skills, certifications, drive distance and what is already on each tech's day, and it gives its reason. It also flags double bookings and jobs running long. It works inside the field software you already run, and your dispatcher makes every assignment.

Signs you need one

  • Your dispatcher assigns jobs from memory because nobody has time to check who is certified for what.
  • Techs pass each other on the highway, each headed to a job in the other's part of town.
  • You find out a job ran long when the next customer calls to ask where the tech is.
  • When your lead dispatcher is out, the board is a mess by mid-morning.

The board runs on memory. A suggestion with the reasons.

The same situation without the agent, then with it. This is an example to show the job, not a client result.

BeforeWithout the agent

  • 7:30 AMFirst job runs long. Board not updated
  • 9:10 AMNew call goes to the nearest tech
  • 9:50 AMThat tech has never worked on that unit

The board runs on memory

With the Dispatch AgentExample
  • 9:10 AMNew call: no cooling, heat pump
  • 9:10 AMSuggests Marcus: 12 minutes away, trained on it
  • 9:11 AMFlags that Dana's 10 AM will run late
  • 9:12 AMDispatcher approves both changes

A suggestion with the reasons

How the Dispatch Agent works, step by step.

One written-down job, from the thing that starts it to the line it leaves in the log.
  1. A job hits the board

    01
    A call is booked, a job is added or an estimate turns into work. The agent picks it up from your field software.
  2. It reads the job

    02
    It reads the job type, the equipment on file, the address, the arrival window and any notes from the person who took the call.
  3. It ranks the techs

    03
    It checks who has the skill and certification, who is nearby or finishing nearby, and who has room before the window closes. It ranks the best two or three and gives a reason for each.
  4. The dispatcher decides

    04
    The suggestion shows up next to the job. The dispatcher accepts it, picks someone else or ignores it. Nothing is assigned until they do.
  5. It keeps watching and logs

    05
    Through the day it compares each job's clock with its estimate and flags the stops at risk. It logs every suggestion, what the dispatcher chose and why each flag was raised.

What it handles, and what waits for you.

The agent has one job and only the access that job needs. Everything it does is logged, and you can turn it off.

On its own

  • Suggests a tech for each new job from skills, location and the day's workload, with the reason.
  • Watches jobs in progress and flags the ones running past their estimate.
  • Catches double bookings, skill mismatches and jobs with no tech assigned.
  • Lists tomorrow's unconfirmed stops so the dispatcher knows which ones are at risk.

Waits for a person

  • Assigning or reassigning a tech to any job.
  • Moving a customer's appointment or changing the arrival window.
  • Telling a customer the tech will be late or that a different tech is coming.

Where it works.

What the agent reads and what it changes in each system. It gets only the access its job needs.

ServiceTitan, Jobber, Housecall Pro, FieldEdge, Service Fusion or Workiz
Reads the board, job types, arrival windows, job status and tech list. Writes a suggestion or a flag on the job, and makes an assignment only after the dispatcher approves it.
Your tech skills list
Reads each tech's certifications, the brands and job types they are cleared for, and their home area. This can live in your field software or in a spreadsheet.
Your truck locations
Reads where each truck is, from the map in your field software or from your vehicle tracking if it can share that. Without it, the agent works from each tech's current and next job address.
Your team chat or text
Sends flags and suggestions to the dispatcher where they already look. It does not message a customer on its own.

The rules you set.

Decided with you during the build, written down, and yours to change later.

Who can take what
List the work each tech is cleared for. For example, only two techs take boiler calls, and an apprentice never goes alone to a panel job.
Drive limits
Set how far a tech should travel for a job, such as no more than 30 minutes unless the call is an emergency.
What counts as running long
Pick the point where a job gets flagged, such as 30 minutes past its estimate with another stop waiting behind it.
What counts as an emergency
Name the calls that jump the line, such as no heat below freezing, an active leak or a burning smell at a panel. The agent puts these at the top with its suggestion.

The Dispatch Agent in your trade.

The job is the same in every trade. The details are not.

HVAC

On a no-cooling call it checks who is cleared for that brand and who holds the refrigerant certification the repair may need. In a heat wave it keeps a list of maintenance visits that could give up their slot, and the dispatcher decides which ones move.

AI for HVAC companies

Plumbing

It tells a drain call from a water heater call from a sewer job, and suggests the truck that carries the camera or the jetter. When a repipe runs past its estimate, it flags the afternoon stops behind it.

AI for plumbers

Electrical

It keeps licensed electricians and apprentices straight, so a service upgrade is not handed to someone who cannot do it alone. It also flags a job that needs the utility to shut off power when no shutoff time is on the file.

AI for electricians

Pest control

Route techs have set stops, so the agent works on the exceptions: the callback, the bed bug inspection, the new customer who wants someone today. It suggests the licensed tech already working nearby, inside FieldRoutes or PestPac.

AI for pest control

What we need from you to build it.

We build each agent for one company, inside the accounts that company already has. The free audit tells you whether this one is worth building before any work starts.
  1. 01

    Access to the schedule, jobs and tech list in your field software.

  2. 02

    Each tech's skills, certifications and home area.

  3. 03

    Your dispatch rules: who takes which work, drive limits and what counts as an emergency.

What it does not do.

Knowing where the agent stops is part of trusting it with the rest.
  • It does not assign, reassign or move anything on its own. The dispatcher decides every time.
  • It does not tell a customer about a late arrival or a change of tech unless a person approves the message.
  • It does not judge how good a tech is. It works from the skills, certifications and areas you give it.

Questions about the Dispatch Agent

Does it replace our dispatcher?

No. It watches the whole board at once, which a person on the phone cannot do, and puts suggestions in front of them. The dispatcher still makes every assignment.

How does it know which tech is right?

From what you tell us and what your records show: skills, certifications, where each tech is and what is already on their day. Each suggestion shows its reason, so the dispatcher can overrule it in a second.

Can it move jobs on its own?

No. Moving an appointment or changing a tech is a promise to a customer and to your crew, so a person approves each one. Once approved, the agent can make the change in your field software and note why.

Can AI do dispatching?

Yes, for the part that is watching and matching. With AI dispatching, the agent reads the whole board, ranks the techs for each job and flags trouble early. The assignment itself stays with your dispatcher.

Is an AI dispatcher the same as dispatch software?

No. Dispatch software is the board your team works in, such as ServiceTitan or Jobber. An AI dispatcher is an agent that reads that board and makes suggestions inside it, so nothing about your software changes.

What happens when a tech calls in sick?

The agent lists that tech's jobs for the day and suggests who could take each one, based on skills and location. Jobs nobody can cover are marked so the dispatcher can call those customers first. The dispatcher approves every change.

Find out what AI could take off your plate.

A free 30-minute audit. You leave with a ranked list of what agents could handle in the software you already run, and what should stay with your team.

Book a free audit

No credit card. No obligation to build.